Resistex c137v2

A high performance fast drying acrylic urethane gloss finish for use where long term exterior gloss and colour retention characteristics are required. RESISTEX C137VSPECIAL FINISH. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature.

For overcoating outside the above parameters and with alkyd. Unheated buildings where condensation may occur.

Resistex C137VSpecial Finish.

Alternative finishes available.

Contact Sherwin-Williams for further information. Category C- Urban atmospheres with moderate sulphur dioxide pollution. Diluted in accordance with the Technical Data Sheet.

Durability should be considered as the coating design life, where . Stripe coat all edges, welds and areas of difficult access, to ensure full film thickness. Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned. Epigrip M9Winterfast Hi-Build Undercoat.

A two component material supplied in separate containers. FIRETEX Mis indefinitely overcoatable with itself. I have been in the coatings industry for almost. I began my career working in the protective laboratory . Envirogard M7is the reccomended topcoat and should be used for any subsequent re-decoration. The above products should be used for subsequent re-decoration.

If it can be guaranteed that application and subsequent in-service conditions will be in a. In all instances for subsequent re-decoration, use FIRETEX. Intumescent paints for passive fire protection and suitable for steel, woo fabric and plaster. International Passive Fire Lt Devon, UK.

Primary structure – Cross laminated timber. Clad in plasterboard for service cupboards, risers and classroom walls to BS 476: Part to achieve minutes Integrity and surface spread of flame.