Florestone terrazzo

Flanges on three sides, cast integral, shall be of galvanized-bonderized steel and shall extend not less than above the shoulders. Shoulder will be not less than 2½ inside. Drain body will be brass, cast integral, . Nailing flange, cast integral, will be galvanized-bonderized steel and extend not less than one inch () above shoulder on two sides for installation.

Flange, cast integral, will be galvanized-bonderized steel and extend not less than one inch () above shoulder on four sides for installation.

ONLY available in White Portland Cement with Tan and Grey marble chips.

Galvanize bonderized steel flange will extend at least one inch above .

Receptor will be reinforced with gauge wire. Standards: International Association of Plumbing and Mechanical Officials File No. Center drain terrazzo shower receptor with flanges on three sides for recess installation. The success of this addition changed the focus of the company.

Terrazzo surface shall be ground and polished with . On the Model 4and 5Series, an exterior floor drain is recommended. Please check unit before installation. Just select your location from drop menu below.

For high wall model specify: “Not less than high inside and not less than 1¾ . Florestone does not sell directly to the public. Molding will be done under heat and pressure using matched metal dies. The unit will be one piece with no seams . Color will be white and will be resistant to fading and abrasion.

Dimensions subject to change without notice. Unit to have 1½ drain opening . CAD Drawings are compressed in zip format (.zip). Catalog covers the following products: . Floor mounted sink to come with four ( 4) heavy duty molded legs and the hardware to attach legs to the sink, and drain plugs with hardware.

Basic shower will conform to ANSI-Z-124. FLORESTONE SHOWER RECEPTORS - TERRAZZO. PARTIAL NAILING FLANGE, PER SIDE. Furnish and install wheelchair accessible.