Deck railing post connection

Many older decks have railing posts installed on the outside of the deck framing, and sometimes those posts were notch-cut at the bottom, where they fit against the outside joists. Today codes demand stronger posts , so they are generally not notche and are installed on the inside of the framing. I am going to explain all the possible ways of building the most crucial part of all wood rail construction - the post to wood frame joist connection.

The illustrations and explanations below represent traditional . As long as the posts are not notche these easily meet the most stringent deck codes.

Another approach gaining in popularity is to use steel connectors to reinforce the post attachment.

No More Notching Carpenters used to routinely notch out the base of deck posts to slip them over the band joist.

Fastening guardrails to deck rim joists or floor joists with wood screws is not acceptable. The Deck Connection and Fastening Guide provides instructions on how to recognize defects and deficiencies in existing decks , and guidance for building strong, safe, long-lasting deck structures. Additionally, it goes detail by detail ( ledger connection , joist-to-beam connection , beam-to- post connection , etc.) through a . The Simpson Strong-Tie Deck Center is designed to help building and design professionals build safe, code-compliant decks. From finding the right products to . This two-sided tear pad shows connector and fastener solutions for building safer decks and patios.

Railing Post -to- Deck Framing. How to use guardrail balusters to eliminate the need for railing support posts. Build Deck Rail – 4×Guard Post with Temporary Supports on Band Joist.

This helps support the guard post and railing by creating additional rigidity, and it limits rotation of the rim joist at the ledger connection as well. We have seen many old decks with rim joists that are all but disconnected from the framing because of the leverage exerted on them by occupants leaning against . Theres nothing wrong to attach beam to post with bolts if they are placed correctly because many constrution connection is shear connections and they work flawlessly, like . You need two per deck railing post. There are two ways to mount posts — on the inside of the rim and end joists or on the outside, as with this deck.

Strong Rail - Post Connections for Wooden Decks by Joseph Loferski and Frank Woeste, P. Dustin Albright and Ricky Caudill. Where common connection details fail to meet code loads, prefab galvanized hold-down hardware passes the test. Researchers at Virginia Tech applied measured loads to deck posts to see .