Two 3 way switches

Connect the wires to the new three - way switches with ground screws using one of the two wiring diagrams (Fig . A or B). Notice that the wire connected to the COM terminals is looped straight through the intermediate switch using a . In building wiring, multiway switching is the interconnection of two or more electrical switches to control an electrical load from more than one location. It should also help in understanding the . A complete tutorial on controlling lights with multiple switches.

Several arrangements of controlling one or more lights with two switches at two locations.

Feel free to contact me with any wiring questions you might have.

When they are connecte the switch is on. How to use - way switches and 4-way switches to control lights from two or more locations. Another variation, a 4-way switch is used when you need to control a . If you need more than two lights, just keep pig-tailing the white and black wires to keep the circuit going.

Learn about - way switch wiring including wiring diagrams. To avoid fire, shock or death, TURN OFF POWER at . And any defective switch or connection further . They are wired so that operation of either switch will control the light. Wago (25) connector (25) connector (25) connector Lever-Nut Assortment Pack: Amazon. All three come from the same location. Your circuit contains two 3-way switches.

Referring to the diagram below: if the switch with the incoming hot is the one you want single control from (shown at left)-. You cannot remember how they were wire and now things do not work. First, you may find it helpful to understand how - way switches work to . Hopefully this video will provide enough information to start you in the right direction. Subscribe for more great videos! With the second circuit, the neutral (white) simply nuts with the others.

For the hots (black), add two pigtails to the source hot and run one to each switch, just as you normally would. In this circuit, two fixtures are shown but more can be added by duplicating the wiring arrangement between the lights for each one added. Here the source is at SWand 3-wire cable runs from there to L1. Two , -wire cables run between the .